About the controls on the air conditioner, Controls, Air conditioner controls – GE AEE08AR User Manual
Page 4: Remote control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
About the controls on the air conditioner.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
NOTE: The display always Light indicates the unit
shows the room temperature ¡s ¡n the temperature or
except when setting the Set delay time set mode,
temperature or the Delay
timer.
• Auto
• High
— Med
• Low
Heat
Cool
Energy Saver
Fan Only
Mod^
Temp
Light indicates the delay
timer is set.
Delay l-24hr
Delay timer
Decrease
Mode select
Delay timer
Increase
Auto Fan on
Fan speed
Increase
Unit power on/off
Air Conditioner Controls
Controls
Remote Control
Power Pad
Turns air conditioner on and off. When turned on,
the display will show the room temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the
Set
temperature
while setting the temperature in
Heat, Cool or
Energy Saver
modes. The
Set
light will turn on
while setting.
Temp Increase A /Decrease
V
Pads
Use to set temperature when in
Heat, Cool
or
Energy Saver mode.
The
Set
light will turn on while
setting.
Delay Timer Increase A (+) /Decrease T(~)
Pads
Each touch of the
Increase A
/
Decrease
V pads
on the unit or the
Increase +
/
Decrease -
pads
on the remote control will set the delay time when
using the
Delay l-24hrt\mer.
The
Set
light will turn
on while setting.
Fan Speed Pads
Use to set the fan speed to
Low, Med, High
or
Auto
on the unit.
NOTE:
On the remote control, use
the fan speed
Increase + / Decrease -
pads to set
the fan speeds to
Low, Med
or
High.
Use the
Auto
pad to turn
Auto
fan on.
Mode Pad
Use to set the air conditioner to
Heat, Cool, Energy
Saver or Eon Only
mode.
Delay Pads
Delay
ON—When the air conditioner is off, it can
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings.
Delay
OFF—When the air conditioner is on, it can
be set to automatically turn off in 1 to 24 hours.
How to set:
Press the
Delay l-24hr
pad on the unit or on the
remote control. Each touch of the
Increase A
/
Decreased
pads on the unit or the
Increase +
/
Decrease -
pads on the remote control will set the
timer in 1-hour intervals. The
Set
light will turn on
while setting.
To review the remaining time on the
Delay l-24hr
timer, press the
Delay l-24hr pad
on the unit
or on the remote control. Use the
Increase A
/
Decrease
V pads on the unit or the
Increase +
/
Decrease -
pads on the remote control to set a
new time if desired.
To cancel the timer,
press the
Delay l-24hr
pad
until the light on the
Delay l-24hr pad
goes off.
Note:
The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to
degree Celcius (°C), press the Temp Increase
A
and Temp Decrease V buttons together and hold for 3
seconds. Repeat the process to change back to degree Fahrenheit (°F)