Remove the air conditioner from the case (cont.), 0 install the bottom case seal, Install the top mounting rail onto the case – GE AEE08AR User Manual
Page 10: E] install the side accordion panels, Window installation instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Window Installation Instructions
REMOVE THE AIR CONDITIONER
FROM THE CASE (CONT.)
Slide the air conditioner from the cose by
gripping the base pan handle and pulling
forward while bracing the case. Do not pull or
lift on the styrofoam discharge area.
0 INSTALL THE BOTTOM CASE SEAL
• Peel the backing from the bottom case seal
and attach it along the bottom of the case in
front of the bottom mounting rail.
Bottom case seal
INSTALL THE TOP MOUNTING RAIL
ONTO THE CASE
Attach the top mounting rail onto the top of the
case with 3 Type B screws.
Press firmly to drive the screws into the gasket
and through the top mounting rail.
Дуре В
. screws
E] INSTALL THE SIDE ACCORDION
PANELS
0 Slide the left and right accordion panels into
the top and bottom mounting rails.
Attach the accordion panels to the case using 3
Type A screws on each side.
Top mounting rail
Accordion
panel
Type A
screws
BACK
Bottom mounting roil
10