GE 2-9200 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

iKiAVAi ■
mf AI I KJi^i mi*
INS» IAULMI IUI>I — VVMI-
1
- mwUM
■IM^
ii^v:i
"Tiiri^ ^e\\cir\V\r\r\£x r>roHlA rw/or anH
lUIII W«l IVA
A
iT
1
1
A
push release door off in direction
1
*
1
1
of arrow. Remove CRADLE
BOTTOM. n.
'/i
tm
---- .
2
. Locats CQRD WRAP POST and
unwrap CORD completely from
base.
3. Feed plug and about 2 inches of
straiqht cord thru hole in CORD
WRAP POST.
4. Wrap remaining straight CORD
around CORD WRAP POST,
leaving enough to go down and
through the restrainer at the coiled
cord end of the cradle.
5. Attach cradle bottom to CRADLE
TOP. Be sure the coiled cord
aligns with the COILED CORD
graphics on the underside of
the CRADLE TOP. Replace
release door to secure cradle.
NOTE: There is only one
configuration in which the
halves fit together properly.
6
. Connect coiled end of CORDio
HANDSET and then, plug straight
end of cord in wall phone modular
jack.
7. Slip
CRADLE
0
\fer
WALL HLAltz
You are now ready to try your new teiephone.