Food amount too large for sensor reheat, Before you call for service, Problem possible causes what to do – GE JES1460DSBB User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before you call for service^
GEAppliances.com
Problem
Possible Causes
What To Do
"LOCKED" (or LOC)
appears in display
The control has been
locked.
Press and hold CANCEL/
OFF or about three
seconds to unlock the
control.
Food amount too large
for Sensor Reheat
Sensor Reheat is for single
servings of recommended
foods.
Use Time Cook
for
large
amounts of food.
"EOOD(orfoodl"
appears on display
For safe cooking "food
detection algorithm" is
added to prevent micro
wave cooking without
first placing food into the
cavity. Through monitor
the door open/close
switch, Food Detection
Algorithm control the
initiating a cooking
sequence.
You should open the door
to check the food. (For
users who place food Into
the cavity before selecting
a cooking sequence, the
door switch Is read to
determine the door has
been opened and then
closed. Upon opening and
the door, a 5-mlnute
count down timer Is started
You can then make your
cooking selection prior to the
expiration of the timer.
When 5-tlmer expires. If you
elect a cooking sequence,
"FOOD” will appear on the
display and an error beep
will sound. Then you should
open the door to check the
food before selecting a
cooking sequence.)
31