Broiling, Baking or roasting, Oven rack positions – Whirlpool RB2OOOXK User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BROILING
1. Place the rack where you
want it for broiling. (See
below for suggestions.)
2. Put broiler pan and food
on the rock.
3. Set Oven Selector to
BROIL.
4.
Set Oven Temperature
Control to BROIL. (Set on o
lower temperature for
slower broiling. See
below.)
5. During broiling the oven
door must be partly open
A built-in stop will hold it
there.
When broiling is done,
turn both knobs to OFF.
Broiling can be slowed
by setting the Oven Temperature Control to o setting
lower than BROIL. When it's on BROIL, the broil element is on oil the time. When it’s
on o temperature, the element turns oft and on. The lower the temperature setting,
the shorter ore the times when the element is on.
The Oven Selector Knob must be on BROIL and the door partly open for all
broiling temperatures.
OVEN RACK POSITIONS
Position racks before turning on the oven.
Broil Element
Lift rack at front and pullout.
BAKING OR ROASTING
Food for baking or roasting should be
placed in the center ofthe oven.
Always leave at least 1 ’
2
to 2 inches
(4-5 cm) between the sides of o pan and the
oven wall and another pan. For more informa
tion, see the "Cooking Guide '
Adjust the top rock so the food to be broiled
is at o suggested distance from the broil ele
ment. (See page 6.) ALWAYS broil with the
door open to the broil-stop.