Whirlpool RB2OOOXK - Manual (Page 4)

Using your oven
Automatic MEALTIMER Clock Manual Oven Light Switch Oven Selector Oven Signal Light
Clock and Minute Timer Start Time Knob Stop Time Knob Adjustable Oven Temperature Control
SETTING THE CONTROLS
BAKING
1. Put oven racks where you warit them.
(See page 5 for suggestions.)
2. Set Oven Selector to BAKE
3. Set Oven Temperature Control to the bak­
ing temperature you want.
4. Let the oven preheat until the Signal Light
goes off.
5. Put food in the oven.
6.
When done baking, turn both knobs to
OFF.
During baking, thè elements will turn on
and off to help hold thè oven temperature at
thè setting. (The top element will never turn
red, but will be hot.) The Slgnal Light will turn
on and off with thè elements.
RESETTING THE OVEN TEMPERATURE CONTROL
Does your new oven seem to be hotter or colder at the same settings than your
old oven. The temperature setting in your old oven may have changed gradually
over the years. The accurate setting of your new oven can seem different.
If you think the oven temperature needs adjusting, follow these steps:
OFF
1. Pull out the center
of the Oven Tem­
perature Control.
Locking Screw
2. Loosen the lock­
ing screw.
3. To lower the tem­
perature, move
black ring so
tooth is deserto
LO. Each notch
equals about 10 F
(5 C).
4. To raise the tem­
perature, move
black ring so
tooth is deserto
Fll. Each notch
equals about 10
(5 0).
Tighten the locking screw. Replace the knob.
'Tmk