Using your refrigerator, Setting the controls, Changing the control settings – Whirlpool ETl8SC User Manual
Page 5: Power saving control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using your refrigerator
REFRIGERATO#
4W
a
B
m
£R • COLDER»
Setting the controls...
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time,,,
1, Set the REFRIGERA
TOR CONTROL to 3,
2 Set the FREEZER
CONTROL to B,
Give the refrigerator time to cooi down com-
pietely before adding food. (This may take sev
eral hours,)
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream
IS firm.
Changing the control settings...
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
• Adjust the Refrigerator Control first,
• Wait at least 24 hours between adjustments,
• Then adjust the Freezer Control, If needed.
QUESTIONS?
...call your
COOL-LINE
service
assistance
telephone
number
[page 11],
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
If Refrigerator
Section is
TOO COLD
If ICE isn't
MADE FAST ENOUGH
If BOTH SECTIONS
are TOO WARM
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Controls not set correctly
for your conditions
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
RECOMMENDED
CONTROL
SETTINGS:
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
4
C
3
A
2
B
3
A
4
B
Power Saving Control...
The Power Saving Control on the Control Con
sole operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
* CONSUMES
IMJ
Use the "CONSUMES LESS ENERGY" setting when
humidity is low.
Use the "REDUCES EXTERIOR MOISTURE" setting
only if moisture forms on the outside of the
refrigerator.