Whirlpool LA6400XK - Manual (Page 4)

Using your Washer
Your autooiatiC .vastier is easv ?o
use. To make it even easien read the
following steps trefore storting \our first
loaa
Start your ,,vasher after you put n
detergent, the Ic.aa ario any o*her
aundry aids acv;o'ding *c ¡nformatiori
on page 3 and oage n
1. Set the LOAD SIZE SELECTOR.
• Select the water level that matches
the size of the ¡oad See oage 5 for
more informatic/n
MPORTANT, For the best cleaning
results with the eas* wrinkling, make
sure the load rms enougn water for
items to move freely
2. Set the TEMPERATURE SELECTOR.
• Match the wash and rinse water tem­
peratures to the type of faPrics and soils
being washed, iSee fhe instructions
under the washer lid and on page 14 m
your Laundry Guide '
• Be sure to use a cocT rinse for PERM,A
NENT PRESS and KNRS GENTLE Cycles
Cold water rinses save energy
and help prevent wrinkles from
setting into fabrics.
3. Select a Cycle and Start the
Washer.
• Push the Cycle Control Knob in and
turn it to the right (clockwise],
• Stop when the pointer is on the num­
ber of minutes of washing you want
n the cycle you want.
• Instructions tor which cycles to use for
each fabric type are under the lid,
• To start the washer, pull the Cycle
Control Knob out. When the cycle is
over, the washer will stop
• To stop the washer at any time
during a cycle, push the Control
Knob in. Pull it out to restart the washer,
• To change a setting, push the Con
trol Knob in to stop the washer. Then turn
the Control Knob to the right (clockwise)
tc the setting you want. Pull the knob
out to start the washer,
• Pages 8-11 show what happens in
each cycle