Crestron electronic DTT-15V2 - Manual (Page 18)

Crestron DTT-15V2 DualTouch™ Technology Touchpanel
8. Reset – Use AUTO ADJUST to reset only the image parameters (menus 1
through 6). Use RECALL to reset all screen options to the factory default.
Select the exit icon to leave this menu without making any changes.
9. Backlight – Use the (-)/(+) buttons to decrease or increase the backlight
brightness. Press Enter to save. Default is 80.
10. Color – Provides a color temperature selection of 9300K, 6500K, 5000K,
DIRECT (no adjustment to the incoming signal) and a USER option to use
the independent RGB adjustment.
Click the icon to allow an independent adjustment of red, green and
blue. Press Enter to save. Defaults are shown as follows.
y DualTouch™ Technology Touchpanel: DTT-15V2 Operations Guide – DOC. 6342 14