beautypg.com

Using your refrigerator, Setting the controls, Changing the control settings – Whirlpool ED20AK User Manual

Page 5: Exterior moisture control

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Using your refrigerator

FREEZER CONTROL REFRIGERATOR CONTROL EXTERIOR MOISTURE CONTROL LIGHT SWITCH

Setting the controls...

Controisfortherefrigeratorandfreezerareinthe Give the refrigerator time to cool down corn-

refrigerator. When the refrigerator is plugged in for pletely before adding food. (This may take sev-

the first time...

eral hours.)

1 Setthp PFFi?lQFPA

These settings should be about right for nor-

TOR CONTROL to 3'

household refrigerator usage.

The controls will be set about right when milk or

juice is as cold as you like when ice cream is firm.

2. Set the FREEZER

CONTROL to B,

Changing the control settings...

If you need to adjust temperatures in refrigerator

or freezer, use the settings listed in the chart below.

Adjust the Refrigerator Control first.
Wait at least 24 hours between adjustments.
Then adjust the Freezer Control if needed.

QUESTIONS?

..call your

COOL-LINE"
service
assistance
telephone
number
(page 16)

CONDITION;

REASON;

RECOMMENDED

CONTROL SETTINGS;

If Refrigerator

Door opened often

Refrigerator

4

Section is
TOO WARM

Large amount of food added
Room temperature too warm

Freezer

A

If Freezer

Door opened often

Refrigerator

3

Section is
TOO WARM

Large amount of food added
Very cold room temperature
(can’t cycle often enough)

Freezer

C

If Refrigerator

Controls not set correctly

Refrigerator

2

Section is
TOO COLD

for your conditions

Freezer

B

If lOE isn't

Heavy ice usage

Refrigerator

3

MADE FAST ENOUGH Very cold room temperature

(can't cycle often enough)

Freezer

C

If BOTH SECTIONS

Door opened often

Refrigerator

4

are TOO WARM

Large amount of food added
Very warm or very cold
room temperatures

Freezer

B

Exterior Moisture Control

The Exterior Moisture Control on the Control

Console operates electric heaters around the

EXTERIOR

MOISTURE

CONTROL

door openings. These heaters help keep moisture
from forming on the outside of the refrigerator.

1. Use the "OFF" setting when humidity is low.

2. Use the "ON" setting if moisture forms on the out­

side of the refrigerator.