Whirlpool EV130C - Manual (Page 6)

Cleaning your freezer
This freezer should be cleaned when frost has built up to about Va inch (6 mm) thickness.
Complete defrosting and cleaning should be done at least once a year.
In high humidity areas, a freezer may need more frequent defrosting.
To dofiDSt and clean:
1. Turn Temperature Control to OFF.
2. Unplug power cord.
3. Place a shallow pen on floor under drain hole in
bottom of freezer.
4. Take out all food and removable parts.
Note: Wrap frozen foods and packages in several
layers of newspaper and cover with blanket. Food will
stay frozen for several hours.
5. Place pan of hot water inside freezer to speed
melting of frost. Keep door open. Ice can be re­
moved in large pieces as it melts. Direct air from
electric fan into freezer to speed defrosting.
6. Clean freezer according to the following
directions.
After defrosting:
1 . Remove shallow pan from underneath freezer
2. Plug in power cord,
3. See directions for "Setting the Temperature Con­
trol," page 5.
Cleaning chart..
Part
Removable parts
(trivet)
What to use
Mild detergent and
warm water.
How to clean
• Wash with warm water and a mild detergent.
• Rinse and dry.
Outside Sponge, cloth or
paper towel; mild
detergent, warm water • Wash with warm water and a miid detergent.
• Rinse and dry.
• Do not use abrasive or harsh cleansers.
Waxing Is recommended In high humidity areas. Use a good auto
paste wax or an appliance wax on painted metal surfaces. Do not
use on plastic because It may damage these parts.
Inside waHs Plastic scraper, pans of • Use plastic scraper to remove frost
hot water, electric fan, • Place pans of hot water in freezer with door open
sponge or towel, baking to speed melting. Directing air from an electric
soda and warm water. fan into freezer will also help.
• Wash with solution of 2 tablespoons (26 g) baking
soda to 1 quart (.95 L) warm water
• Rinse and dry,
DO NOT USE an Ice pick, knife of other sharp-pointed tool or any
type of electric defroster to defrost freezer. They can cause damage
to the liner and Interior parts.
Door liner and gasket Sponge, soft cloth or
paper towel; mild deter­
gent and warm water. Wash with mild detergent and warm water.
Rinse and dry.
DO NOT USE cleaning waxes, concentrated detergents, bleaches
or cleansers containing petroleum on plastic parts.
•
Condenser colls Vacuum cieaner;
using the brush
attachment. • Slide freezer out away from the wall.
• Clean dust and lint from condenser coils behind
the freezer, every 2 or 3 months.