Removing the base grille, Changing the light bulbs, Top freezer models – Whirlpool UPRIGHT FREEZER User Manual

Page 26: Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Removing the base grille

To remove the grille:

1. Open door above base grille.

2. Pull base grille forward to release the

support tabs from the metal clips.

Do not remove Tech Sheet

fastened

behind the grille.

To replace the grille:

1. Line up grille support tabs with metal clips.

2. Push firmly to snap into place.

3. Close door above base grille.

See cleaning instructions for defrost pan and

condenser coils on page 29.

Condenser
coils

Metal clips

— Defrost pan Base

grille

Support tabs

Changing the light bulbs

▲ WARNING

Electrical Shock Hazard

Unplug the refrigerator before

removing a iight bulb.

Failure to do so can result in death

or eiectrical shock.

Top freezer models

NOTE: Not all commercial appliance bulbs

will fit your refrigerator. Be sure to replace a

bulb with one of the same size and shape.

To change the refrigerator light:

1. Unplug the refrigerator.

2. Reach behind the Control Panel to

remove bulb.

3. Replace with a 40-watt appliance bulb.

4. Plug in the refrigerator.