Whirlpool ET20EK - Manual (Page 6)

Adjusting the crisper humidity control..
You can control the amount of humidity in the
moisture-sealed crisper.
1. The control can be adjusted to any setting
between LOW and HIGH.
2. LOW (open) lets moist air out of crisper for best
storage of fruits and vegetables with skins.
3. HiGH (closed) keeps moist air in the crisper for
best storage of fresh leafy vegetables.
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Giass sheives are strong enough
to hoid bottles, milk and other heavy food items.
GLASS SHELVES ARE
HEAVY. BE CAREFUJ^
tifi
111
f'.-
To remove glass shelves:
1. Tiit up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the siots in the sheif
supports.
2. Tiit up front of sheif untii hooks drop into siot.
Lower front of sheif to ievei position.
"t;'; i Removing and adjusting the freezer shelf...
To remove the shelf:
1. Lift front siightiy.
2. Lift back off supports.
3. Replace in reverse order.
To adjust the shelf:
1. Remove sheif.
2. Remove supports by siiding upwards.
3. Replace supports on desired level.
4. Replace shelf.
Removing crispers and crisper eover...
PULL OUT TO STOP, LIFT THE FRONT
AND PULL AGAIN
REMOVE THE
GLASS INSERT,
LIRTHE FRAME FRONT,
THEN THE BACK.
To remove the crispers:
1. Slide crisper straight out to stop, iift front, then
siide the rest of the way out.
2. Replace in the reverse order.
To remove the cover:
1. Push up giass insert from bottom, then siide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by puiling up and out.
4. Remove mefai cover support.
To replace the cover:
1. Replace metai cover support on wail supports
in front section of cabinet.
2. Fit back of corner into notch supports on waiis of
refrigerator, then lower into place.
3. Slide back of glass insert into place, then lower
front.
GLASS IS HEAVY.
BE CAREFUL.