Setting the controls, Baking, I?esetting the oven temperature control – Whirlpool 27-inch Built-In Electric R8700PXS User Manual
Page 4: Tighten the locking screw. replace the knob, Using yofxr oven
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using yofxr oven
Automatic MEALTIMER' Clock Manual Oven Light Switch
rà
Minute Timer
Start Time Knob
Stop Time Knob
SETTING THE CONTROLS
BAKING
1. Put oven "QCKs where you want therri,
(See page 5 (or suggestions.)
2
.
Set Oven Selector to BAKE,
3
.
Set Over Temperature Control to the bak
ing temperature you want.
4.
Let
the oven preheat until the Signal Light
goes oft
5.
Put tooP :'i The oven
6
.
Wheiv dene baking, tu'n both knobs to
OFF
Oven Temperature Control
Oven Indicator Light
Oven Selector
‘Tmk
During baking, the elements will turn on
and off to help hold the oven temperature at
the setting. (The top element will never turn
red, but will be hot.) The Signal Light will turn
on and off with the elements.
I?ESETTING THE OVEN TEMPERATURE CONTROL
Does your ■ ew oven seem to be hotter or colder than your old oven at the
ome setting.v'^ The temperature setting in your old oven may have changed
gradually over the years. The accurate setting of your new oven can seem differ
ent It you thir K the oven temperature needs adjusting, follow these steps
. Pull the O en tem
perature Control
strauvr" O'
2
.
Loosen the lock
ing screw:
NOTICE pos-tion
or
notches
To lower the
temperature, move
a notch closer to LO,
Each notch equals
about 10°F (5°C).
To raise the
temperature, move
a notch closer to HI.
Each notch equals
about 10°F (5°C).
Tighten the locking screw. Replace the knob.