Whirlpool RAB3132D - Manual (Page 7)

O P E R A T I N G Y O U R W A S H E R
Using rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and spin.
1. Push in Cycle Control Knob and turn
clockwise until indicator points to RINSE,
as illustrated.
2. Pull out Cycle Control Knob. The washer
fills to selected load size, agitates, drains,
and spins.
Using drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in Cycle Control Knob and turn
clockwise until indicator points to SPIN,
as illustrated.
2. Pull out Cycle Control Knob. The washer
drains and then spins.
What happens in each cycie
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer begins agitating
immediately after filling; agitation can occur
with the washer lid up or down.
After agitation starts, the Cycle Control Knob
turns clockwise until it points to an OFF area
and the cycle ends.
WASH RINSE
RII RII
□ill
Wash selected time
m
Rinse
Drain- No agitation Drain-No agitation
Spin
m
Spin
LQJ
Off