Loading suggestions, Saving energy, Manual clean lint filter – Whirlpool RAB3132D User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

L A U N D R Y T I P S
Loading suggestions
For these suggested full-sized loads, set the Load Size Selector to the largest load size
setting.
LARGE CAPACITY WASHERS
Heavy Work
Permanent
Mixed Load
Towels
Clothes
Press
2 double or
8 bath towels
2 pair pants
1 double sheet
1 king size
8 hand towels
3 shirts
1 tablecloth
sheet(s)
10 wash cloths
3 pair jeans
1 dress
4 pillowcases
1 bathmat
1 coverall
1 blouse
6 T-shirts
6 pair shorts
2 shirts
Delicates
Knits
2 slacks
3 shirts
2 camisoles
2 slacks
2 blouses
4 shirts
4 tops
2 dresses
2 pillowcases
2 blouses
6 handkerchiefs
4 slips
4 panties
2 bras
2 nighties
Saving energy
• Use warm or cold wash water for most
loads. Use hot water only when washing
heavy, greasy soils or whites.
• Use cold rinses.
• Wash full loads.
• Use a smaller load size setting when
washing small loads.
• Avoid rewashing. Use enough detergent
and pretreat stains or heavy soils. Use the
cycles and wash times recommended for
the fabric and soil.
• Use your washer during off-peak hours -
usually early morning and late evening.
(Ask your power company.)
Manual clean lint filter
Clean the fitter at the bottom of the agitator
after every load for the best filtering results.
To clean:
1. Lift off the agitator barrel.
2. Wash or wipe the filter clean in the
bottom of the agitator barrel. The filter is
not removable.
3. Replace agKator barrel and snap into
place.
AgKator barrel
Manual clean
lint flKer
11