Meeting the electrical requirements, Recommended grounding method – Whirlpool ADO15 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEFORE USING YOUR DEHUMIDIFIER
Meeting the electrical requirements
OBSERVE ALL GOVERNING CODES AND
ORDINANCES.
Electrical ground is required on this
appiiance.
A 115 volt, 60 Hz., AC only, 15 ampere fused
electrical supply is recommended. (Time delay
fuse or circuit breaker is recommended.) It is
recommended that a separate circuit serving only
this appliance be provided. Do not use an
extension cord.
DO NOT, UNDER ANY CiRCUMSTANCES,
REMOVE THE POWER SUPPLY CORD
GROUND PRONG.
Recommended grounding
method
For your personal safety, this appliance must be
grounded. This appliance is equipped with a
power supply cord having a 3-prong grounding
plug. To minimize possible shock hazard, the
cord must be plugged into a mating grounding
type wall receptacle, grounded in accordance
with the National Electrical Code (ANSI/NFPA 70,
latest edition) and all local codes and ordinances.
If a mating wall receptacle is not available, it is
the responsibility of the customer to have a
properly grounded, 3-prong wall receptacle
installed by a qualified electrician.
3-prong
grounding
plug
3-prong
grounding
type wall
■ receptacle
Power supply cord
Grounding prong