The water dispenser, The dispenser light – Whirlpool 4YED27DQDN00 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Press a sturdy glass against the ice
dispenser bar. Hold glass close to
dispenser opening so ice does not fall
outside of glass.
3. Remove the glass to stop dispensing.
NOTE: The first few batches of ice may have
an off-flavor from new plumbing and parts.
Throw the ice away. Also, large amounts of
ice should be taken from the ice bin, not
through the dispenser.
The water dispenser
Chilled water comes from a tank behind the
meat drawer. It holds approximately 1.5 L
( V
/2
quarts).
When you first hook up the refrigerator,
press the water dispenser bar with a glass or
jar until you have drawn and discarded 1.9 to
2.8 L (2 or 3 quarts). The water you draw and
discard will rinse the tank and pipes.
Allow several hours to chill a new tankful.
NOTE: The small tray beneath the dis
penser is designed to evaporate small
spills. There is no drain in this tray. Do not
pour water into it.
To dispense water:
1. Press a sturdy glass against the water
dispenser bar.
2. Remove the glass to stop dispensing.
NOTE: Dispense enough water every week
to maintain a fresh supply.
The dispenser light
To turn on night light, slide dispenser
LIGHT switch to the left. See page 20 for
directions for changing the dispenser light
bulb.
ON
OFF
WATER
17