Whirlpool 4YED27DQDN00 - Manual (Page 12)

Adjusting the EZ-Track* shelf
(on some models)
To slide shelf side-to-side:
1. Lift slightly on shelf front.
2. Slide to desired location.
3. Lower shelf front to level position.
NOTE: You do not have to remove small
items from the shelf before moving it side-to-
side. You may need to remove larger items.
To remove the shelf:
1. Remove all items from the shelf.
2. Hold back of shelf with one hand.
3. Lift front of shelf to 45° angle.
4. Lower shelf slightly to release shelf from
upper channel track. Then pull shelf
straight out.
NOTE: Shelf is heavy. Make sure you use
both hands when removing shelf.
To remove shelf track:
1. Lift both sides of track slightly.
2. Pull track straight out.
Hold both sides and lift up
and out.
To replace shelf track:
1. Guide track hooks into the shelf support
slots on the back wall of the cabinet.
NOTE: Make sure both track hooks are in
slots and that the slots are parallel to
each other.
2. Push track backward and down.
3. Check that track Is completely seated in
the shelf supports.
'li
"US
Shelf support
Make sure both sets of hooks are in
support slots.
11