Adjusting the crisper humidity control, On some models), Removing the meat drawer and cover – Whirlpool 4YED27DQDN00 User Manual

Page 14: To remove the meat drawer, To remove the cover, Adjusting the meat drawer temperature

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Humidity Control

Adjusting the crisper humidity control

(on some models)

You can control the amount of humidity in
the moisture-sealed crispers. Adjust the
control to any setting between LOW and

HIGH.

• LOW (open) lets moist air out of the crisper

for best storage of fruits and vegetables
with skins.

• HIGH (closed) keeps moist air in the

crisper for best storage of fresh, leafy
vegetables.

Removing the meat drawer and cover

To remove the meat drawer:
1. Slide the meat drawer straight out to

the stop.

2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.

To remove the cover:
1. Remove meat drawer and crisper.
2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.

To replace the cover:
1. Fit back of cover into notch supports on

walls of refrigerator.

2. Lower front into place.
3. Replace meat drawer and crisper.

Pull out to the stop, lift the

front, and pull again.

Adjusting the meat drawer temperature

Cold air from the freezer flows into the meat
drawer. This helps keep the meat drawer
colder than the rest of the refrigerator for
better storage of meats.

Slide the control from side to side to let

more or less cold air through.

1 3