Whirlpool RT16VK - Manual (Page 11)

U S I N G Y O U R R E F R I G E R A T O R
Removing the meat drawer and cover
Remove the meat drawer and cover for easier
cleaning.
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift the front of the meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release the rear of the
cover from the shelf.
3. Tilt cover up at the front.
4. Pull cover forward and out.
To replace the cover:
1. Fit notches and rear edge of cover over rear
and center crossbars on the shelf.
2. Lower cover into place.
3. Replace the meat drawer.
Remove meat drawer before cover.
Pull out to
the stop,
lift the
front and
pull again.
Removing the crispers and crisper cover
Because your crispers are not the same size,
your crisper cover has an adjustable center
track so you can switch positions of the crisp­
ers. You can adjust the center track with the
cover in the refrigerator by removing the
crispers and the cover insert.
To remove the crispers:
1. Slide crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push up the cover insert from the bottom,
then sliide out with both hands.
2. Lift front of cover frame.
3. Lift cover frame up and out.
To replace the cover:
1. Fit back of cover frame into notch supports
on back wall of refrigerator, then lower the
front into place.
2. Slide back of cover insert into place, then
lower the front.
Rerrtove the
cover insert.
Lift the cover
front, then the
back.
11