Removing the oven door, To remove – Whirlpool FGP325A User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

C A R I N G F O R Y O U R R A N G E

5. Before putting the burners back, dry them

thoroughly by setting them in a warm oven for
30 minutes.

6. Replace burners, making sure they are

properly seated and level. Replace screws.

7. Occasionally check the burner flames for

proper size and shape as shown. A good
flame Is blue in color. If flames lift off ports, are
yellow, or are noisy when turned off, you may
need to clean the burners (see page 17), or
call a qualified technician for adjustment.

Typical surface burner flame

at the highest setting

Removing the oven door

Removing the oven door will help make it easier

to clean the oven.

^WARNING

Burn and Electrical Shock Hazard

Make sure all controls are OFF and the
oven is cool before removing oven door.
Failure to do so can result in burns or
electrical shock.

To remove:

1. Open the door as far as it will go.
2. Remove the screws on each side of the oven

door.

3. Close the door about % of the way.
4. Lift the door up and off the hinges.

Screw