Whirlpool Gas LG5791XM - Manual (Page 9)

Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
straight out.
DO NOT run the dryer with
the lint screen loose,
A damaged or missing.
^ ^ Doing so can cause over­
heating, can damage fabrics and
can be a FIRE HAZARD.
with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into
place.
Lint removal
Lint can gather inside the dryer and create a fire hazard This lint
should be removed every 2 to 3 years, or more often, depending on
dryer usage.
ELECTRIC DRYERS
Cleaning should be done only by a qualified person.
• Avoid electrical shock
hazard - unplug power
• A supply cord or turn off
^ ^ electrical power.
• Avoid injury or damage - do not
put hands inside cabinet.
• Make sure dryer is cool.
1. Remove back panel (electric) or
front panel (gas).
2. Avoid damaging wires,ther­
mostats, funnel or igniter,
3. Remove lint from shaded area -
see art - with a saft brush or
vacuum cleaner.
4. Replace panel; reconnect and re­
level dryer.