Push the, Start button, Changing a setting – Whirlpool Gas LG5791XM User Manual
Page 5: Set temperature 2. seeector, To stop and restart the dryer, Select a 1.cycle, Push the 3. start button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Select a
1.CYCLE
Turn the Control Knob either way to
point to the cycle ohd setting you
wont. See page 6 for information on
the cycles.
Push the
3. START Button
The dryer will start tumbling when
yau push the START Button.
Changing a setting
The setting can be changed at any
time by turning the Central Knob to a
new setting.
Set TEMPERATURE
2. SEEECTOR
Turn the Temperature Selector to the
needed drying temperature.
To stop and restart
the dryer
To stop the dryer, open the door (or
turn the Control Knob to OFF).
To restart the dryer, close the door,
select cycle, if necessary, and push
START.
The Cycle Control Knob should point to OFF when the dryer is not in use.