Operating instructions, The automatic cycles, Umed drying – Whirlpool Gas LG5791XM User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating instructions
The automatic cycles
The automatic cycles allow you
to select the degree of dryness you
prefer for the clothes being dried.
The Control Knob moves and stops
several times until the load reaches
the dryness setting you selected. Then
the knob automatically moves to
OFF and tumbling stops.
Use
AUTOMATIC
REGULAR to
dry heavy
and medium-
weight cotton items. The load tum
bles without heat during the iast 5
minutes. This helps make the load
easierto handle.
Use
AUTOMATIC
PERMANENT
PRESS to dry
permanent
press, knits and other synthetic fab
rics. The load tumbles without heat
during the last 10 minutes. This helps
keep wrinkles from setting in.
For the first few loads, set the Control
Knob to point to an* in either auto
matic cycle. When the dryer stops,
feel the dried items.
If items are drierthan you like, use
a setting to the right of fhe*the next
time you dry a similar load.
If items are not as dry as you like,
use a setting to the left of the* the
next time you dry a similar load.
OVERDRYING CAN CAUSE SHRINKAGE, STATIC CLING
AND DAMAGE TO SOME FABRICS.
Umed drying
Use the TIMED DRYING Cycle for
any load you want to dry by time. For
example: small loads, large bulky
items, items to be fluffed or dusted
with the FLUFF AIR heat setting.
• Turn the Control Knob to the number
of minutes you want - from 10 to 60.
• The last 5 minutes of this cycle are
without heat - a cool-down time. This
helps make the load easierto
handle.
6