The key eject lock, Changing light bulb, Removing the base grille – Whirlpool EV200D User Manual
Page 4: Bottom basket
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Key Eject Lock...
can
help
reduce
the
entrapment.
hazard of child
To lock or unlock the freezer you must hold the
key in the lock while turning. The lock is spring
loaded so the key cannot be left in the lock.
Ifthe key is lost, contactyour WHIRLPOOL dealer
for a replacement. Always give the
complete
model and serial number of your freezer when
requesting a replacement key.
Changing Light Bulb.
1. Unplug power cord.
2. Remove light shield by pulling away from the
side wall.
3. Replace bulb with 40 watt appliance bulb.
4. To replace shield, insert tabs into slots in wall
and press.
Removing the Base Grille.
• Open the door.
• Lift up on two tabs showing through grille.
• Swing the top of the grille forward.
• Lift grille off bottom supports.
• Replace in reverse order.
• Do not remove Tech Sheet
fastened behind
the grille.
Bottom Basket...
To remove:
• Lift up, then pull out.
To replace:
• Insert into rear slides.
• Lower into place.
• Push basket into freezer.