Whirlpool AC1052XS - Manual (Page 2)

Contents
Page
BEFORE YOU USE YOUR
AIR CONDITIONER
................................................. 2
Energy Saving Tips..................................................3
HOW TO START & USE
YOUR AIR CONDITIONER
..................................... 3
To Start Your Air Conditioner..................................3
Using Exhaust Vent Control................................... 4
Changing Air Direction ........................................... 5
Cleaning and Caring for Your
Air Conditioner..................................................... 4
Cleaning Front Panel...............................................4
Page
Cleaning Filter ..................................................5
Annual Maintenance........................................ 5
Do-It-Yourself Maintenance
Oiling The Fan Motor.................
IF YOU NEED SERVICE
OR ASSISTANCE ....................
Before Calling For Assistance ... .7
If You Need Assistance ...................... 7
If You Need Service ............................ 7
If You Have A Problem........................7
If You Need FSP"
Replacement Parts .................................. 7
©1989 Whirlpool Corporation
Copy your Model and
Serial Numbers here...
When you need service or call with a question,
have this information ready.
1. Complete Model and Serial Numbers.
To find Model and Serial Numbers remove
the front panel (see page 4). The numbers
are located on a label attached to the
evaporator coil cover near the top of the unit.
SERIAL LABEL
2
.
Purchase date from sales slip.
Copy this information in the spaces below.
Keep
this book, your INSTALLATION
INSTRUCTIONS, and your sales slip
together in a handy place.
Model Number
Serial Number
Purchase Date
Service Company Name and Telephone Number
BEFORE YOU USE YOUR
AIR CONDITIONER
Read and carefully follow the “INSTALLATION
INSTRUCTIONS” included with your air conditioner.
It is your responsibility to make sure
that your air conditioner:
• Has been properly installed.
• Is the right size for the area you want to cool.
• Has been properly connected to electrical
supply and grounded. (See INSTALLATION
INSTRUCTIONS.)
• Is properly used only for the job for which it was
designed.
• Is not used by anyone unable to operate it
properly.
• Is properly maintained.
To remove the Consumer Buy Guide label and energy
rating label lift one edge and puii straight off.
To remove any remaining glue;
1. Rub briskly with thumb to make a bail, then remove.
-OR-
2. Soak area with a liquid hand dishwashing detergent
before removing glue as described in step 1.