After the self-cleaning cycle is completed – Whirlpool RB170PXX User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

J ' n n
L. • U U
T
ooo®
TO SET PUSH DESIBED PUI
aiiTTOH T
hen
turn
set
km
TO CANCEL PUSH PUNCTIO
then
TuflN SET KNOeTOil
3. Lift the panel between the oven door and the
control panel. Move the Lock Lever
all the way
to the right
- the Clean position.
4. Push in and release the Self-Clean button. A
3-hour Self-Cleaning cycle will be set auto
matically. The display will count down the time
in minutes. The CLEAN and HEATING
Indicator Lights will come on. The Auto Oven
Symbol (in upper left corner of display) and the
SELF-CLEAN Indicator Light on the display
will also come on. The display will count down
in minutes.
If a cleaning cycle other than 3 hours is
desired, push in and hold the Bake Hours
button and turn the Set Knob to the new time
up to 4 hours.
• Use 2 hours for light soil.
• Use 3 hours for moderate soil.
• Use 3^ hours for heavy soil.
NOTE: The STOP TIME Indicator Light will
flash during the entire Self-Cleaning cycle. The
BAKE HOURS Indicator Light will stay on.
5. The LOCKED Indicator Light will come on when
the upper oven temperature exceeds normal
baking temperatures. The Lock Lever must not
be moved and the door can’t be opened when
the light is on. If you want to see the Stop Time
of the Self-Cleaning cycle, push the Stop Time
button. Push the Self-Clean button to see
cleaning time again.
upper oven selector ^/iv upper oven temp
6. After the Self-Cleaning cycle is completed,
the CLEAN and HEATING Indicator Lights will
go off. The Auto Oven Symbol and SELF
CLEAN Indicator Light on the display will also
go off. The display will show the time of day.
When the oven reaches normal baking tem
peratures, the LOCKED Indicator Light goes off.
Move the Lock Lever back to the left.
Do not
force it.
Wait until it will move easily.
25