Using your refrigerator, Setting the temperature control – Whirlpool 2183013 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using Your Refrigerator

To obtain the best possible results from your refrigerator, it is important that you operate it

properly. This section tells you how to set the temperature control, remove and adjust some
of the features in your refrigerator, and how to save energy.

Setting the temperature control

The Temperature Control is in the refrigera
tor. It controls the temperature in both the

refrigerator and freezer compartments.

When you plug in the refrigerator for the
first time:

1. Set the Temperature Control to 3 (nor

mal). Temperature Control adjustments
range from 1 (warmest) to 5 (coldest).

NOTE:

Turning the Temperature Control

to OFF stops cooling in both the refrigera
tor and freezer compartments, but it does

not disconnect the refrigerator from the
power supply.

2. Give the refrigerator time to cool down

completely before adding food. This could
take several hours.

3. Adjust the Temperature Control to have

food as cold as you like. The setting

indicated above should be correct for
normal, household refrigerator usage.

NOTE;

The built-in exterior moisture control

continuously guards against moisture build

up on the outside of the refrigerator cabinet.

800

447-6737

WITH QUESTIONS OR COMMENTS