beautypg.com

Installing it properly, Leveling it – Whirlpool 2183013 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

B E F O R E U S I N G Y O U R R E F R I G E R A T O R

Installing it properly

1. Allow 3 inches (7.5 cm) between over­

head cabinets and refrigerator top.

2. Aliow at ieast 1 inch (2.5 cm) between

the refrigerator condenser on the back
and the wail.

3. Allow V

2

inch (1.25 cm) on each side of

the refrigerator for ease of instaliation.

4. If the hinge side of the refrigerator is to

be against a wail, you might want to
leave extra space so the door can be
opened wider.

5. Level your refrigerator.

Leveling it

Your refrigerator has two front, adjustable

rollers to prevent rocking on uneven floors.

To adjust rollers:

1. Roll refrigerator into position.

2. Adjust roilers by turning the leveiing

screws, located at the front of the base.
• Turn clockwise to raise.
• Turn counterciockwise to lower.

NOTE:

Rollers are adjusted correctly

when the refrigerator no longer rocks
when the doors are opened or closed.

3. Repeat this procedure whenever the

refrigerator is moved.

Use a screw­

driver to adjust

Roller

Lower

Leveling screw

Raise

NOTE:

If you want the doors to close easier,

use the rollers to raise the front of the
refrigerator slightly.