Whirlpool ET1 8MK - Manual (Page 5)

Using your refrigerator
Power Saving Control
Setting the controls...
Controls for the refrigerator and freezer are in *ne
refrigerator. When the refrigerator is plugged in for
the first time.,
1, Set the REFRIGERA­
TOR CONTROL to 3,
Set the FREEZER
CONTROL to B,
Give the refrigerator time to cooi down com­
pletely before adding food. (Th s may take sev
eral hours,]
These settings shouid be about right tor normal
household refrigerator usage.
The controls will be set about right when milk or
juice IS as cold as you like and when ice cream
IS firm.
Power Saving Control...
The Power Saving Controi on the Control Con­
sole operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
MiS ,ESS tNfPr.t • B[fX>CES EX
1. Use the "CONSUMES LESS ENERGY" setting when
humidity IS low
2, Use the "REDUCES EXTERIOR MOISTURE" setting
f moisture forms on the outside of the
refrigerator.
Changing the control settings...
If you need to adjust temperatures In refrigerator
or freezer, use the settings listed in the chart below.
• Adjust the Refrigerator Control first
• Wait at least 24 hours between adjustments,
• Then adjust the Freezer Control, if needed
.call your
COOL-LINE
service
assistance
telephone
number
[page 15).
RECOMMENDED CONTROL
CONDITiON: REASONS: SETTINGS:
f Refrigerator Door opened often Refrigerator 4
Section is Large amount of food added Freezer C
TOO WARM Room temperature too warm
If Freezer Door opened often Refrigerator 3
Section is Large amount of food added Freezer A
TOO WARM
?
Very cold room temperature
If Refrigerafor Controls not set correctly Refrigerator 2
Section is for your conditions Freezer B
TOO COLD
If ICE isnt Heavy ice usage Refrigerator 3
MADE FAST ENOUGH Very cold room temperature Freezer A
If BOTH SECTIONS Door opened often Refrigerator 4
are TOO WARM Large amount of food added Freezer B
Very warm or very cold
room temperatures
5