Changing the control settings – Whirlpool ED20PK ED22PK User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R E F R I G E R A T O R
Give the refrigerator time to cool down
completely before adding food. This may
take several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls are set correctly
when milk or juice is as cold as you like
and when ice cream is firm. If you need to
adjust these settings, see “Changing the
control settings” below.
NOTE:
The Automatic Exterior Moisture
control continuously guards against moisture
build-up on the outside of your refrigerator
cabinet. This control does not have to be set
or adjusted.
Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide. If you have
questions, call our Consumer Assistance
Center number. (See page 23.)
CONDITION:
REASON:
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
• Door opened often
Refrigerator
4
section
• Large amount of food added
Freezer
A
too warm
• Room temperature too warm
Freezer
• Door opened often
Refrigerator
3
section
• Large amount of food added
Freezer
C
too warm
• Very cold room temperature
(can't cycle often enough)
Refrigerator
• Controls not set correctly
Refrigerator
2
section
for your conditions
Freezer
B
too coid
ice not
• Heavy ice usage
Refrigerator
3
made fast
• Very cold room temperature
Freezer
C
enough
(can’t cycle often enough)
Both
• Door opened often
Refrigerator
4
sections
• Large amount of food added
Freezer
B
too warm
• Very warm or very cold room
temperatures