Whirlpool ED20PK ED22PK - Manual (Page 13)

U S I N G Y O U R R E F R I G E R A T O R
Removing the freezer door shelves
(ED22PK only)
Remove the freezer door shelves for easier
cleaning.
To remove the door shelves:
1. Grasp shelf at both ends.
2. Lift shelf up and pull it out.
To replace the door shelves:
1. Insert door shelf hooks into guides on
both edges of door liner.
2. Push shelf down to lock into place.
UP to
stop ice
maker.
DOWN to
start ice
maker.
Using the optional automatic ice maker
If you have the automatic ice maker acces­
sory (contact dealer for ice maker kit num­
ber), or if you plan to add one later, there
are a few things you will want to know:
• The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically.
UP to shut off the ice maker.
NOTE: Do not turn ice maker on until it is
connected to the water supply. Instruc­
tions for ice maker water suppiy hook
up are attached to the back of the
refrigerator cabinet.
• The dial or lever on the side of the ice
maker changes the size of the cubes.
• It is normal for ice crescents to be attached
by a corner. They break apart easily.
• The ice maker will not operate until the
freezer is cold enough to make ice. This
can take overnight.
• Good water quality is important for good
ice quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such as salt from a
malfunctioning softener) can damage the
ice maker mold and lead to poor ice
quality. If a softened water supply cannot
be avoided, make sure the water softener
is operating properly and well maintained.
13