What happens in each cycle – Whirlpool 3360462 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING YOUR WASHER
What happens in each cycle
Permanent Press cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi
ately after filling; agitation can occur with the
washer lid up or down. After agitation starts,
the Cycle Control Knob turns clockwise until it
points to OFF and the cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
Regular and Short cycles
Fill to selected load size
Wash selected time
Drain-No agitation
Spin
Fill
Rinse
Drain-No agitation
Spin-Spray rinse
Spin
Off
Fill to selected load size
5d
Wash selected time
Partial drain-No agitation
Fill to selected load size
A
Brief agitation
Drain-No agitation
Spin
Fill
Rinse
Drain-No agitation
Spin-Spray rinse
Spin
Off