Whirlpool 3360462 - Manual (Page 22)

IF YOU NEED ASSISTANCE OR SERVICE
PROBLEM POSSIBLE CAUSE SOLUTION
Washer fills and
drains without
running Cycle control knob is not pointing
to a number in the cycle.
Set cycle control knob on correct
number in the cycle.
Washer drains
during wash and
rinse cycles, or
water siphons out
Drain hose is lower than the
water level in the washer.
Adjust drain hose so that it is higher
than the water level in the washer.
2. If your problem is not due
to one of the items listed in
Step 1 ...
Contact the dealer from whom you purchased
the unit or an authorized Whirlpool service
company.
3. If you need FSP* replace­
ment parts ...
FSP is a protected trademark of Whirlpool
Corporation for quality parts. Look for this
symbol of quality whenever you need a
replacement part for your Whirlpool appliance.
FSP replacement parts will fit right and work
right, because they are made to the same
exacting specifications used to build every
new Whirlpool appliance. To locate FSP
replacement parts in your area, contact the
dealer from whom you purchased the unit or
an authorized Whirlpool service company.
22