Whirlpool ET22ZM - Manual (Page 5)

Using your refrigerator
Setting the controls... Give the refrigerator time to cool down com­
pletely before adding food. (This may take sev-
Controls tor the refrigerator and freezer are n the eral hours.)
refrigerator. When the refrigerator is plugged in for
the first time
OFT
1 Set the TEMPERA
TURE CONTROL tc3.
2. Set the AIR CON­
TROL to B
These settings should be about right for normai
household refrigerator usage.
The controls will be set about right when milk or
luice IS as cold as you like and when ice cream
s firm
Do not block the air outlet on the control panel.
Blocking it can slow the air movement needed to
Keep temperatures at the level you set.
Changing the control settings...
If you need to adjust temperatures in the refriger­
ator or freezer, use the settings listed in the chart
below.
Adjust the Temperature Control first.
Wait at least 24 hours between adjustments.
Then adjust the Air Control, it needed
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section IS
TOO WARM
QUESTIONS?
,. call your
COOL-LINE®
service
assistance
telephone
number
(page 15)
If Refrigerator
Section is
TOO OOLD
If ICE isnt
MADE FAST ENOUGH
If BOTH SECTIONS
are TOO WARM
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(cant cycle often enough)
Controls not set correctly
tor your conditions
Heavy ice usage
Very cold room temperature
(cant cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
RECOMMENDED SETTINGS:
Temperature Control 4
Air Control C
Temperature Control 4
Air Control A
Temperature Control 2
Air Control B
Temperature Control 3
Air Control A
Temperature Control 4
Air Control B
Power Saving Control...
The Power Saving Control on the Control Cor­
sole operates electric heater around the door openi­
ngs. These heaters help keep moisture from forming
on the outside of the refrigerator.
o
F
f
Use the "OFF' set-
t-ng when humidity
s IQW
CM
Use the "ON"setting
if moisture forms
on the outside of the
refrigerator.