beautypg.com

Changing air direction, Caring for your air conditioner, Cleaning of front panel and futer – Whirlpool ACE082XS0 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Changing Air Direction

The louvers in the grille area at the top of

the air conditioner control the direction of the
conditioned air.

The tabs at the bottom of the grille can be

moved to the right, left or straight ahead. Move
the tabs in the direction in which you want the
air to flow.

Caring for your air conditioner

Proper use and care of your air conditioner will help insure longer life and lower operating costs.

Follow these instructions carefully or call your dealer for an annual checkup.

Cleaning of Front Panel and FUter

A clean filter helps remove dust, lint and other particles from the air. Check every two weeks to see if

the filter needs cleaning. The front panel may also be cleaned at this time.

VV WARNING: To prevent possible

electrical shock, unplug unit from

electrical supply or turn off at fuse box
or circuit breaker.

VV WARNING: To prevent personal

injury, handle the air conditioner

with care. The metal fins on the coils
are sharp.

1. Remove front panel from unit for cleaning.

Press down at top edge of front panel to
release it from top of cabinet.

2.

Pull top of front panel toward you.

3.

Lift up and away from bottom spring clips.

5.

Clean filter by using a vacuum cleaner or,

if very dirty, wash filter with warm water and

a mild detergent. Air dry thoroughly before
replacing. DO NOT USE A HOT AIR DRYER.

CAUTION: Do not use oleaning fluid,

solvents, abrasive cleaners, or strong
deteigents. They may damage parts.

6

.

Clean front panel using a soft cloth with

warm water and a mild detergent. Rinse and
dry. (See CAUTION above.)

7.

Replace filter and hold it with elastic band.

8

.

Wipe control panel clean with a soft dry

cloth.

9.

Replace front panel. Locate bottom of panel

on the spring clips. Press down on top edge
of front panel and push front toward unit

to secure upper tabs.

4.

Remove filter from front panel by removing

elastic band which holds it in place.