Whirlpool ET20NK - Manual (Page 5)

Using your refrigerator
REFRIGERATOR POWER SAVING CONTROL FREEZER
REFRIGERATOR CONTROL POWER SAVING CONTROL LIGHT SWITCH FREEZER CONTROLl
Setting the controls...
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time...
1. Set the REFRIGERA­
TOR CONTROL TO 4
2. Set the FREEZER
CONTROL TO C
To adjust a control,
reach under the console
and turn the knob.
Give the refrigerator time to cool down com­
pletely before adding food. (This may take sev­
eral hours.)
These settings should be about right for nor-
mai household refrigerator usage.
The controls will be set about right when milk or
juioe is as cold as you like and when ice cream is
firm.
Refirgerator Control adjustments range from 1 to
8 . Freezer Control adjustments range from A to D.
Changing the control settings...
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below
Adjust the Refrigerator Control first.
Wait at least 24 hours between adjustments.
Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
QUESTIONS?
call you
COOL-LINE"
service
assistance
telephone
number
(page 15).
If Refrigerator
Section is
TOO COLD
If ICE isn't
MADE FAST ENOUGH
If BOTH SECTIONS
are TOO WARM
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Controls not set correctly
for your conditions
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
RECOMMENDED
CONTROL SETTINGS:
Refrigerator 6
Freezer D
Refrigerator 4
Freezer A
Refrigerator 2
Freezer A
Refrigerator 4
Freezer A
Refrigerator 6
Freezer C
Power Saving Control...
The Power Saving Control on the Control Con­
sole operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
POWER SAVING CONTROL
1. Use the "CONSUMES LESS ENERGY" setting when
humidity is low.
2. Use the "REDUCES EXTERIOR MOISTURE" setting if
moisture forms on the outside of the refrigerator.