Esc "&" s n m [a[p] s × a]m - n + 1 – Citizen Systems iDP-3550 User Manual
Page 106
ESC "&" s n m [a[p] s
×
a]m - n + 1
[Function]
Defining the download character set
[Code]
<1B>H <26>H s n m [a[p] ... × a>] m - n + 1 [Range] s = 2 ≤ n ≤ m ≤ 255 0 ≤ a ≤ 9 0 ≤ p1 ... ps × a ≤ 255 [Outline] This command defines the download alphenumeric or Katakana. s denotes the number of [Default] Same as the internal character set. [Caution] The horizontally adjacent dots cannot be printed. The 2nd-byte data in the vertical direction
32
bytes in the vertical direction, n the start character code, and m the end character code,
respectively. When defining only one character, set n = m.
The 224 ASCII code characters, 32 to 255, are definable. a specifies the number of dots in
the horizontal direction to be defined. p is the data you want to define and shows the a-dots
worth of pattern in the horizontal direction from the left edge. The remaining pattern on the
right side will be a space. Once the download characters are defined, they remain valid until
they are redefined or the download deletion command (ESC DC2 n1 n2) is executed.
is valid only for the most significant bit.