CHEVROLET 2010 Camaro User Manual

Page 270

A. Parking/Turn Signal Lamp
B. Halogen Headlamp

3. Disconnect the wiring harness

and turn the bulb socket
counterclockwise to remove it
from the headlamp assembly.

4. Pull the bulb straight out from the

socket.

5. Push the new bulb into the

socket and reinstall the socket
into the headlamp assembly by
turning it clockwise.

6. Reconnect the electrical

connector.

7. Pull the duct back out of the

air cleaner/filter housing until
the tabs snap the duct back
into position.

Headlamps, Front Turn
Signal and Parking
Lamps (Up-Level Vehicle)

The up–level model vehicle has a
HID headlamp and a turn signal
lamp on the headlamp assembly.
The park lamp is also the function
of the HID headlamp. See High
Intensity Discharge (HID) Lighting
on page 9-37 for more information.

To replace the turn signal bulb:

1. Open the hood. See Hood

on page 9-5.

2. Press in on the tabs located on

the sides of the duct and then
push the duct rearward into the
air cleaner/filter housing.

9-38

Vehicle Care