Carl Goldberg GBGA1083 - Manual (Page 11)

11
Wild Stick .40
5. Fit the landing gear to the bottom
of the fuselage and install the four
screws and flat washers. Use lock-
tite on the screws.
6. install the axels using the aircraft
lock nuts.
7. install the wheels using one wheel
collar on the inside and one on the
outside of the wheel.
Rudder installation
1. install two control horns on the
rudder with the bottom edge of the
control horn flush with the bottom
edge of the rudder. use two 2mm
screws with nuts to mount the two
horns.