Cadillac 2007 Escalade - Manual (Page 478)

Removing the Flat Tire and
Installing the Spare Tire
Use the following pictures and instructions to
remove the flat tire and raise the vehicle.
1. Loosen the plastic nut caps on the bolt-on
wheel cover by turning the wheel wrench
counterclockwise. If needed, finish loosening
them by hand. The nut caps will not come off.
2. Using the flat end of the wheel wrench, pry
along the edge of the cover until it comes off.
3. Use the wheel wrench to loosen all the wheel
nuts. Turn the wheel wrench counterclockwise
to loosen the wheel nuts. Do not remove
the wheel nuts yet.
478