Cadillac 2007 Escalade - Manual (Page 446)

2. Remove the two
screws from the
taillamp assembly.
3. Pull the taillamp assembly rearward until you
disengage the inner pins on the taillamp
assembly from the vehicle.
4. Press the release tab, if the bulb socket has
one, and turn the socket counterclockwise to
remove it from the taillamp assembly.
5. Pull the old bulb straight out from the socket.
6. Press a new bulb into the socket, insert
the socket into the taillamp assembly and
turn the socket clockwise into the taillamp
assembly until it clicks.
7. Reinstall the taillamp assembly. When
reinstalling, make sure to line up the pins
on the taillamp assembly with the vehicle.
If you do not line up the pins correctly,
you will not be able install the taillamp
assembly properly.
If you need to replace the taillamp, stoplamp,
or turn signal, you will need to see your dealer
for service.
446