Cadillac 2007 Escalade - Manual (Page 303)

How to Change the Video Format
When in the Auxiliary Mode
The auxiliary input video format is preset to
NTSC. In some countries, the video format may
be PAL. To change the video format, perform
the following:
1. Press the display menu button on the
remote control.
2. Select screen option and press enter to
select.
3. Press the up or down arrow buttons to
select the video format option and press
enter to set the format.
Audio Output
Audio from the DVD player or auxiliary inputs may
be heard through the following possible sources:
• Wireless Headphones
• Vehicle Speakers
• Vehicle wired headphone jacks on the
rear seat audio system, if your vehicle has
this feature.
The RSE system will always transmit the audio
signal to the wireless headphones, if there is
audio available. See “Headphones” earlier in this
section for more information.
The DVD player is capable of outputting audio to
the wired headphone jacks on the RSA system,
if your vehicle has this feature. The DVD
player may be selected as an audio source on
the RSA system. See Rear Seat Audio (RSA)
on page 310 for more information.
When a device is connected to the A/V jacks,
the rear seat passengers will be able to hear audio
from the auxiliary device through the wireless or
wired headphones. The front seat passenges
will be able to listen to playback from this device
through the vehicle speakers by selecting AUX
as the source on the radio.
If a playback device is plugged into the radio’s
auxiliary input jack, the front seat passengers will
be able to listen to playback from this device
through the vehicle speakers by selecting AUX
as the source on the radio.
303