Burris C4 Plus - Manual (Page 2)

The Burris C4 Plus (Cartridge Calibrated Custom
Clicker – plus Wind Map) system gives shooters and
hunters the ability to match elevation adjustment to
their favorite cartridge and bullet, making pinpoint
accuracy easier to achieve.
Send us your cartridge information online and we’ll
provide a custom elevation knob that matches your
favorite load. PLUS, we’ll provide a customized Wind
Map that shows, in MOA, a 10 MPH wind hold-off value
for your cartridge at 100-yard increments. The simple-
to-use C4 Wind MOA Reticle works seamlessly with
your customized Wind Map, featuring MOA tick marks
that extend out to 10 MOA in each direction, making it
quick and easy to calculate hold-off for wind.
Let the C4 Plus riflescope take you one step closer to
perfection!
The C4 Plus custom knobs eliminate the guesswork for
holdover. Just dial in the known distance and use the
MOA Wind Map to determine the hold-off for a 10 MPH
wind. In the example above, at 400 yards you simply
hold 2.9 tick marks into the wind for pinpoint accuracy.
Note: It is important that you provide Burris with the most accurate load and
environmental information as possible. Burris warrants that each Custom Clicker
and Wind Map will be calibrated mathematically correct for the data you provide.
Burris is not responsible for any inaccuracy to the actual trajectory realized by
velocity, ballistic coefficient, or environmental variances in field conditions
compared to the data provided by you or an ammo/bullet manufacturer for
preparing the Custom Clicker and Wind Map.
1