Bullet Tools SST226 - Manual (Page 3)

3
SST220 SET Up
SST226 SET Up
You will need #2 & #3 Phillips head screwdrivers
and a 1/2” (13mm) socket or wrench.
You will need #2 & #3 Phillips head screwdrivers.
Please Review and Verify Parts Included in Box:
Please Review and Verify Parts Included in Box:
F.
F.
6.
6.
8.
8.
1.
1.
1a.
1a.
A.
A.
B.
B.
D.
D.
E.
E.
C.
C.
2.
2.
3.
3.
4.
4.
5.
5.
7.
7.
220 HARDwARE kIT:
226 HARDwARE kIT:
A.
C.
D.
E.
F.
B.
A.
C.
D. G.
E.
F. B.
1. Power Assembly
1a. Safety Lock pin
2. Handle Assembly
3. Fence
4. Table
5. Tail
6. Rails (2)
7. Hone Stone
8. Mounting Bracket (4)
9.
HARDWARE KIT
1. Power Assembly
1a. Safety Lock pin
2. Handle Assembly
3. Fence Assembly
4. Table
5. Tail
6. Rails (4)
7. Hone Stone
8. Mounting Bracket (4)
9.
HARDWARE KIT
Item A. (4) 6mm x 60mm PH Phillips Machine Screws
Item B. (4) M6 Star Washers
Item C. (4) 6mm x 25mm PH Phillips Machine Screws
Item D. (5) M6 x 16mm Phillips Machine Screws
Item E. (4) #10 x 1 Phillips Self Tapping Screws
Item F. (2) M8 x 50mm Hex Bolts
Item A. (8) 6mm x 65mm PH Phillips Machine Screws
Item B. (8) M6 Star Washers
Item C. (8) 6mm x 25mm PH Phillips Machine Screws
Item D. (6) M6 x 16mm Phillips Machine Screws
Item E. (4) #10 x 1 Phillips Self Tapping Screws
Item F. (2) M8 x 50mm Socket Head Cap Screws
Item G. (1) M6 Allen Wrench