Boekel Scientific 270500 Thermo Shaker - Manual (Page 7)

4. Operation
(cont’d)
4.7
When the set time has elapsed the platform motion stops and a audible alarm is given.
Press Run/Stop T(ºC)/RPM button (4) to stop the signal.
NOTE: The timer does not stop the heating/temperature maintenance process. This can
be done manually by decreasing the set temperature below 25ºC (indication OFF).
4.8 To reset the timer during an operating cycle, press the Run/Stop TIME button once (5)
to stop the timer. Press the Run/Stop TIME button again to restart the timer.
NOTE: Resetting the timer in 4.8, does not stop the shaking process.
4.9 The platform can be stopped any time by pressing the Run/Stop T(ºC)/RPM button (4).
4.10 To reset the program from the beginning, depress the RUN/STOP- T(C°)/RPM button for 3-4
seconds. Secondly, depress the RUN/STOP- button for 3-4 seconds. At this point, your
program is set back to zero and can be re-programmed.
N2400305, Feb 2007, Rev 0
Page 7
270500
Operating Instructions