Boekel Scientific 132000-2 Economy Analog Incubators - Manual (Page 6)

5
4.2 Setting the Temperature
Use the temperature adjust knob to set the desired temperature. The knob is
rotated clockwise to increase the chamber temperature and counter clockwise to
decrease the chamber temperature.
4.3 Operating the Incubator
To turn the incubator on, switch the power switch to the on (I) position. Set the
desired chamber temperature. The heater lamp will illuminate and remain lit until
the chamber reaches the set temperature. After reaching the set temperature,
the heater lamp will cycle on and off with heater operation. Allow a 60 minute
chamber temperature equilibration when starting the incubator from a cold start.
Allow at least 15 minutes for the re-equilibration when changing temperatures.
To turn the incubator off, switch the power switch to the off (O) position or unplug
the unit. If the temperature adjust knob is not moved when the incubator is
powered down, the incubator will return to its previously set temperature upon
restart.
5. Accessories
5.1 Removable Shelf – Catalog Number C1902053
5.2 Shelf Bracket – Catalog Number A1903208