Boekel Scientific 132000-2 Economy Analog Incubators - Manual (Page 3)

2
1. Safety
Always observe the following safety precautions:
• Use only as specified by the operating instructions or the intrinsic
protection may be impaired. After transport or storage in humid
conditions, dry out the unit before connecting it to the supply voltage.
During drying out the intrinsic protection may be impaired.
• Connect only to a power supply with a voltage corresponding to that on
the serial number label.
• Connect only to a power supply that provides a safety ground terminal.
• Before moving, disconnect at the power supply socket.
• Do not check the temperature by touch, but instead use the thermometer.
• To reduce the risk of eye injury during high temperature operation, use
safety goggles or spectacles.
• Do not touch surfaces that become hot during high temperature operation.
• Insure that the operating temperature is less than the maximum operating
temperature of your sample material.
• Insure that the power switch is easily accessible during use.
• If liquid is spilled inside the unit, disconnect it from the power supply and
have it checked by a competent person.
• It is the user’s responsibility to carry out appropriate decontamination if
hazardous material is spilled on or inside the equipment.
• The responsible body shall be made aware that, if the equipment is used
in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired.