Boekel Scientific 234100-2 UV Crosslinker AH - Manual (Page 9)

N2400340 Rev. 2 Page 9
7.0 Technical Specifications
This equipment is for indoor use, with maximum relative humidity
of 80% non-condensing. Installation category II (transient
voltages). Pollution degree 2 in accordance with IEC 664. For
operation at altitudes of up to 6500 feet.
Ambient Temperature
Operating Range 16°C to 28°C
Maximum Time Setpoint 999m 59s in 1 second increments
Maximum Energy Setpoint 9,999,900µJ in 100µJ increments
Supply Ratings Model 234100: 120VAC±10%, 50/60 Hz
Model 234100-2: 230VAC±10%, 50/60 Hz
Power Rating 80W
Net Weight 30lb
Exterior Dimensions (maximum) 15 1 /
8
”W x 14 3 /
8
”D x 10 1 /
4
”H
This product has been tested to the requirements of CAN/CSA-
C22.2 No. 61010-1, second edition, including Amendment 1, or a
later version of the same standard incorporating the same level of
testing requirements.
8.0
Maintenance and Service
8.1 Calibration
This unit has been programmed and calibrated to work with
254nm-, 306nm-, and 368nm-wavelength bulbs, available from
Boekel Scientific. Switching between these wavelengths does
not require manual recalibration of the unit. The proper
wavelength simply needs to be selected from the setup menu.
Note: Using third-party bulbs may compromise the accuracy of
the unit, as the Boekel UV Crosslinker has been programmed and
calibrated to work with Boekel part numbers as listed in the
following table:
254nm Bulb – Clear Boekel Part Number 920-0305
306nm Bulb – White Boekel Part Number 920-0306
368nm Bulb – Black Boekel Part Number 920-0307